Epson Artisan 810 Service Manual page 129

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
When replacing the Main Board, the MAC address need to be
A D J U S T M E N T
R E Q U I R E D
set if the EEPROM data could not be read from the old Main
Board. (See "5.2.6 MAC Address Setting"
Figure 4-45. Position for the MAC Address Label
After removing/replacing the Main Board, make the specified
adjustments. (See
DISASSEMBLY/ASSEMBLY
(p.217).)
Label, MAC address
Chapter 5 "ADJUSTMENT".)
Disassembly Procedures
Revision G
129
Confidential