Scanner Decoration Plate Front - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD

9.4.2.24 Scanner Decoration Plate Front

This section describes the disassembly/reassembly procedures of the
C H E C K
Scanner Decoration Plate Front for Artisan 730/PX730WD/
P O I N T
TX730WD.
The disassembly/reassembly procedures for Artisan 837/
PX830FWD differ from those for Artisan 730/PX730WD/
TX730WD, therefore, see
Front" (p.307) for the procedures.
Parts/Components need to be removed in advance:
Scanner Unit/Document Cover/Scanner Upper Housing
Removal procedure
1. Release the hook (x1) that secures the Scanner Decoration Plate Front from
the bottom of the Scanner Upper Housing.
2. Slide the Scanner Decoration Plate Front in the direction of the arrow and
remove the Scanner Decoration Plate Front.
Scanner Upper Housing
Figure 9-64. Removing the Scanner Decoration Plate Front
Artisan 837/730/PX830FWD/PX730WD/TX730WD
"9.4.2.15 Scanner Decoration Plate
Scanner Decoration Plate Front
Bottom
When installing the Scanner Decoration Plate Front, align the ribs
(x4) of the Scanner Decoration Plate Front shown in
the holes (x4) of the Scanner Upper Housing.
Scanner Upper Housing
Figure 9-65. Installing the Scanner Decoration Plate Front
Hook
Disassembly/assembly
Revision G
Fig. 9-65 with
Rib
318
Confidential