Upper Left Housing - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
4. Close the Scanner Unit.
5. Tighten the screw (x1) after making sure that there is no
gap between the Scanner Unit and the printer.
Check the gap.
Figure 4-160. Installing the Scanner Unit (2)
Make sure to insert the terminal of the grounding wire to the
fixing rib of the frame. (See
For the routing the FFCs, see
(p.196).
When installing the Cable Cover, secure it with a new Harness
Cover Clamp. (See
After removing/replacing the Scanner Unit, make the specified
A D J U S T M E N T
R E Q U I R E D
adjustments. (See Chapter 5
DISASSEMBLY/ASSEMBLY
Fig. 4-156.)
"4.4 Routing FFC/cables"
Fig. 4-155.)
"ADJUSTMENT".)
Disassembly/reassembly procedures specific to Artisan 710/PX710W/TX710W

4.3.1.2 Upper Left Housing

Because the parts to remove differ between models, see below for
C H E C K
other than Artisan 710/725/PX710W/TX710W/PX720WD/
P O I N T
TX720WD.
Artisan 810/835/PX810FW/TX810FW/PX820FWD/TX820FWD:
4.2.3.4 Upper Left Housing / Panel Lock Button (p.114)
Artisan 837/PX830FWD:
9.4.2.1 Decoration Plate Left Upper Sub (p.293)
Artisan 730/PX730WD/TX730WD:
9.4.2.16 Decoration Plate Left Upper/Decoration Plate Left
Upper Sub (p.308)
Parts/Components need to be removed in advance:
None
Removal procedure
1. Remove the screw (x1) that secures the Upper Left Housing.
2. Slide the Upper Left Housing to the rear side, release the hooks (x2) and
remove the Upper Left Housing.
Figure 4-161. Removing the Upper Left Housing
Revision G
Upper Left Housing
Hook
C.B.P. 3x10 (black) (6±1Kgfcm)
181
Confidential