Cdr Tray Assy - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Need to retighten screw for ASF Paper Guide when
disassembling and reassembling the Lower ASF Paper guide
assy. Tighten a screw while pushing ASF Paper Guide Assy
toward the front side of printer when tighten screw for ASF
Paper Guide. (See
as
Figure 4-98. Retightening screw for ASF Paper Guide
Make sure no scratches on paper by paper feed test with Ultra
Glossy Photo paper after reassemble Lower ASF Paper Guide
Assy.
When replacing the Lower ASF Paper Guide Assy, make sure to
A D J U S T M E N T
R E Q U I R E D
carry out specified lubrication. (See
DISASSEMBLY/ASSEMBLY
Fig. 4-98.)
ASF Paper Guide
Chapter 6 "MAINTENANCE")

4.2.5.9 CDR Tray Assy

Parts/Components need to be removed in advance:
ADF Unit (Artisan 810/835/837/PX810FW/TX810FW/PX820FWD/TX820FWD/
PX830FWD only)/Scanner Unit/Upper Left Housing/Paper Guide Top Assy/
Upper Housing/Rear Left Housing/Left Housing/Decoration Belt/Power Supply
Unit/Rear ASF Paper Guide Cover/Lower ASF Paper Guide Assy
Removal procedure
1. Release the hook (x1) of the Spur Gear B on the Spur Gear A side, and
remove the Spur Gear A. (See
2. Align the grooves on the CDR Tray Assy with the teeth of the Spur Gear B,
and remove the Spur Gear B.
Spur Gear A
Figure 4-99. Removing the CDR Tray Assy (1)
Disassembly Procedures
Fig. 4-99.)
Hook
Spur Gear B
Grooves
Confidential
Revision G
153