Right Housing/Housing Front Right - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD

9.4.2.7 Right Housing/Housing Front Right

This section describes the disassembly/reassembly procedures of the
C H E C K
Right Housing/Housing Front Right for Artisan 837/PX830FWD.
P O I N T
The disassembly/reassembly procedures for Artisan 730/PX730WD/
TX730WD differ from those for Artisan 837/PX830FWD, therefore,
see "9.4.2.21 Right Housing / Housing Front Right" (p.315)
procedures.
Parts/Components need to be removed in advance:
ADF Unit/Scanner Unit/Decoration Plate Left Upper Sub/Paper Guide Top Assy/
Upper Housing/Hinge/Rear Right FAX Housing
Removal procedure
1. Remove the screws (x2) that secure the Right Housing.
Figure 9-19. Removing the Right Housing (1)
Artisan 837/730/PX830FWD/PX730WD/TX730WD
for the
Right Housing
Positioning hole & dowel
C.B.P. 3x10 (6±1Kgfcm)
C.B.S. 3x6 (8±1Kgfcm)
Disassembly/assembly
2. Release the dowel (x1) on the front side (see
B (x1) on the bottom of the Right Housing, and remove the Right Housing in
the direction of the arrow.
Right Housing
Figure 9-20. Removing the Right Housing (2)
3. Release the hooks (x2) of the Housing Front Right on the bottom of the printer
and dowel (x1) of the Base Frame, and remove the Housing Front Right. (See
Fig. 9-20.)
Figure 9-21. Removing the Housing Front Right
Revision G
Fig. 9-19), hook A (x3) and hook
Hook A
Rib
Hook B
Housing Front Right
Dowel
300
Confidential