Routing Ffc/Cables - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD

4.4 Routing FFC/cables

For routing FFCs/cables for ADF/Scanner of Artisan 837/730/
C H E C K
PX830FWD/PX730WD/TX730WD, see
P O I N T
(p.319).
ADF/SCANNER
(ARTISAN 810/835/PX810FW/TX810FW/PX820FWD/TX820FWD)
No. FFC/cable name
1 ADF Motor Cable
2 ADF Sensor Cable
3 Scanner Cover Open Sensor FFC CN10
4 Scanner Carriage FFC
5 Scanner CR Encoder FFC
6 Grounding wire (x2)
Note * : See Fig. 4-196 for the connector positions on the Main Board (Artisan 810/835/
PX810FW/TX810FW/PX820FWD/TX820FWD).
Grounding wire from
the Scanner Unit
Grounding wire from
the ADF Unit
Ferrite Core A:
Put the Scanner Carriage FFC
through this and attach it to
the Upper Housing.
Ferrite Core B:
Put the Scanner Cover Open Sensor FFC
through this and secure it together with
the FFC on the Main Board Unit with
double-sided tape.
Figure 4-194. ADF/Scanner
(Artisan 810/835/PX810FW/TX810FW/PX820FWD/TX820FWD)
DISASSEMBLY/ASSEMBLY
"9.4.3 Routing FFC/cables"
CN No. * Remarks
Artisan 810/835/PX810FW/TX810FW/
CN25
PX820FWD/TX820FWD only
Artisan 810/835/PX810FW/TX810FW/
CN51
PX820FWD/TX820FWD only
Ferrite core x1
CN41 Ferrite core x1
CN49 ---
--- ---
Scanner CR Encoder FFC
ADF Motor Cable
Scanner Carriage FFC:
Secure this on Main Board
Unit with double-sided tape.
ADF Sensor Cable
Scanner Cover Open
Sensor FFC
Double-sided tape
SCANNER
(ARTISAN 710/725/PX710W/TX710W/PX720WD/TX720WD)
No. FFC/cable name
1 Scanner Cover Open Sensor FFC
2 Scanner Carriage FFC
3 Scanner CR Encoder FFC
4 Grounding wire (x1)
Note * : See Fig. 4-198
PX710W/TX710W/PX720WD/TX720WD).
Grounding wire
Ferrite Core A:
Put the Scanner Carriage FFC
through this and attach it to
the Upper Housing.
Ferrite Core B:
Put the Scanner Cover Open Sensor
FFC through this and secure it together
with the FFC on the Main Board Unit
with double-sided tape.
(Artisan 710/725/PX710W/TX710W/PX720WD/TX720WD)
Routing FFC/cables
CN No. *
CN10 Ferrite core x1
CN41 Ferrite core x1
CN49 ---
--- ---
for the connector positions on the Main Board (Artisan 710/725/
Scanner CR Encoder FFC
Scanner Carriage FFC:
Secure this on Main Board
Unit with double-sided tape.
Figure 4-195. Scanner
Revision G
Remarks
Scanner Cover Open
Sensor FFC
Double-sided tape
196
Confidential