Rear Right Fax Housing - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD

9.4.2.6 Rear Right FAX Housing

This section describes the disassembly/reassembly procedures of the
C H E C K
Rear Right FAX Housing for Artisan 837/PX830FWD.
P O I N T
The disassembly/reassembly procedures for Artisan 730/PX730WD/
TX730WD differ from those for Artisan 837/PX830FWD, therefore,
see "9.4.2.20 Rear Right Housing" (p.314)
Parts/Components need to be removed in advance:
ADF Unit/Scanner Unit/Decoration Plate Left Upper Sub/Paper Guide Top Assy/
Upper Housing/Hinge
Removal procedure
1. Remove the screws (x3) that secure the Rear Right FAX Housing.
Figure 9-17. Removing the Rear Right FAX Housing (1)
Artisan 837/730/PX830FWD/PX730WD/TX730WD
for the procedures.
Hook A
Rear Right FAX Housing
C.B.P. 3x10 (6±1Kgfcm)
C.B.S. 3x6 (5±1Kgfcm)
C.B.A. 3x8 (6±1Kgfcm)
Disassembly/assembly
2. Release the hook A in Fig. 9-17, and also release the ribs (x2) on the right side
and hook B in Fig. 9-18, then remove the Rear Right FAX Housing by lifting
it in the direction of the arrow.
Power Supply Unit Cable
Hook B
Right Housing
Rear Right FAX Housing
Figure 9-18. Removing the Rear Right FAX Housing (2)
When installing the Rear Right FAX Housing, insert the ribs
(x2) of the Rear Right FAX Housing to the inside of the Right
Housing. (See Fig. 9-18.)
When installing the Rear Right FAX Housing, align the point A
of the Rear Right FAX Housing with the inside of the Base
Frame. (See Fig. 9-18.)
When installing the Rear Right FAX Housing, be careful not to
let the Power Supply Unit Cable get caught by the point B of the
Rear Right FAX Housing. (See
Revision G
Point A
Point B
Rib
Fig. 9-18.)
299
Confidential