Left Housing - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD

9.4.2.5 Left Housing

This section describes the disassembly/reassembly procedures of the
C H E C K
Left Housing for Artisan 837/730/PX830FWD/PX730WD/
P O I N T
TX730WD.
The procedures are described using Artisan 837/PX830FWD in this
section. Artisan 730/PX730WD/TX730WD can be disassembled/
reassembled in the same procedures, though the shape of some parts
are different.
Parts/Components need to be removed in advance:
ADF Unit (Artisan 837/PX830FWD only)/Scanner Unit/Decoration Plate Left
Upper Sub/Paper Guide Top Assy/Upper Housing/Rear Left Housing
Removal procedure
1. Remove the screws (x2) that secure the Left Housing.
Left Housing
Artisan 837/PX830FWD
C.B.P. 3x10 (6±1Kgfcm)
C.B.A. 3x8 (6±1Kgfcm)
Figure 9-15. Removing the Left Housing (1)
Artisan 837/730/PX830FWD/PX730WD/TX730WD
Artisan 730/PX730WD/TX730WD
C.B.P. 3x10 (6±1Kgfcm)
C.B.A. 3x6 (6±1Kgfcm)
Disassembly/assembly
So as to make description easier, the printer in the photographs is
C A U T I O N
placed vertically in the following steps. Be careful about ink spilling
if the printer is tilted in practical operation.
2. Release the hook A (x3) on the bottom, dowel (x1) on the front side of the
Left Housing and hook B (x1) on the front bottom of the Left Housing, and
remove the Left Housing in the direction of the arrow.
Left Housing
Figure 9-16. Removing the Left Housing (2)
Revision G
Housing Front Left
Hook A
Positioning hole & dowel
Hook B
298
Confidential