Decoration Plate Left Upper Sub - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD

9.4.2.1 Decoration Plate Left Upper Sub

This section describes the disassembly/reassembly procedures of the
C H E C K
Decoration Plate Left Upper Sub for Artisan 837/PX830FWD.
P O I N T
The disassembly/reassembly procedures for Artisan 730/PX730WD/
TX730WD differ from those for Artisan 837/PX830FWD, therefore,
see "9.4.2.16 Decoration Plate Left Upper/Decoration Plate Left
Upper Sub" (p.308) for the procedures.
Parts/Components need to be removed in advance:
None
Removal procedure
1. Remove the screw (x1) that secures the Decoration Plate Left Upper Sub.
Figure 9-4. Removing the Decoration Plate Left Upper Sub (1)
Artisan 837/730/PX830FWD/PX730WD/TX730WD
Decoration Plate Left Upper Sub
C.B.P. 3x10 (6±1Kgfcm)
Disassembly/assembly
2. Open the Panel Unit.
3. Insert the flathead screwdriver into the gap between the Decoration Plate Left
Upper Sub and Upper Housing as shown in
Plate Left Upper Sub to release the ribs (x2) of the Upper Housing.
4. Remove the Decoration Plate Left Upper Sub to the rear of the printer.
Panel Unit
Decoration Plate Left Upper Sub
Figure 9-5. Removing the Decoration Plate Left Upper Sub (2)
Revision G
Fig. 9-5, and lift the Decoration
Upper Housing
Rib
293
Confidential