Parts Transferred From The Old Printer When Replacing The Printer Mechanism - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
4.2.1 Parts transferred from the old printer when
replacing the Printer Mechanism
When replacing the Printer Mechanism, transfer the necessary parts from the old
printer to the new one in the order given in this flowchart.
Flowchart
START
Remove
Install
Group A
Perform " 5.4.1 I/S Decompress (p238)
Group B
Group C Group D
Replace the Printer Mechanism with a new one.
Group C Group D
Install the IC Guide (Fig. 4-79), and then
carry out the Leak check (p208)
inspection (p233).
Group B
Group A
Following the Required Adjustment List
(p211), perform printing adjustments.
DISASSEMBLY/ASSEMBLY
".
Group E
Group C
1.Rear Left Housing (p117)
2.Left Housing / Decoration Belt L (p117)
3.Power Supply Unit (p130)
Group E
and the PG
C H E C K
P O I N T
Group D
CSIC Assy (p143)
Printhead (p133)
IC Guide
Printer Mechanism
Group A (Front and bottom side)
Cassette Unit/EJ Cover Assy (p122)
Waste Ink Tray Assy (p156)
Disassembly Procedures
The PG adjustment for the Printer Mechanism has been
carried out, however, make sure to perform the PG inspection
(p233) at the point shown in the flowchart.
You can work from any of the groups indicated in parallel (C, D,
E) in the flowchart. If there is no ordinal number in each group,
you can remove/install the parts in no particular order.
Group B
1.ADF Unit (p110)
2.Scanner Unit (p111)
3.Upper Left Housing / Panel Lock Button (p114)
4.Upper Housing (p115)
Group A (Rear side)
Rear ASF Paper Guide Cover (p119)
Paper Guide Top Assy (p123)
Group E
1.Hinge (p113)
2.Rear Right FAX Housing (p120)
3.Right Housing / Card Cover (p121)
4.Wireless LAN Board (p131)
5.Main Board / Grounding Plate M/B (p126)
Revision G
(with Panel Unit)
108
Confidential