Removing The Circuit Board; Panel Unit - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Align and insert the dowel of the Base Frame to the positioning
hole of the Right Housing. (See
Attach the Card Cover after installing the Right Housing to the
printer.
When attaching the Card Cover, insert the ribs (x2) of the Card
Cover to the inside of the Right Housing, and secure it with the
hooks (x2).
Right Housing
Card Cover
Figure 4-177. Attaching the Card Cover
DISASSEMBLY/ASSEMBLY
184
Fig. 4-174.)
Hook
Rib
Disassembly/reassembly procedures specific to Artisan 710/PX710W/TX710W

4.3.2 Removing the Circuit Board

4.3.2.1 Panel Unit

The disassembly/reassembly procedures for Artisan 810/835/837/
C H E C K
725/730/PX810FW/TX810FW/PX820FWD/TX820FWD/
P O I N T
PX830FWD/PX720WD/TX720WD/PX730WD/TX730WD differ
from those for Artisan 710/PX710W/TX710W. See below for the
procedures.
Artisan 710/PX710W/TX710W:
Artisan 725/PX720WD/TX720WD:
Artisan 837/PX830FWD:
Artisan 730/PX730WD/TX730WD:
Parts/Components need to be removed in advance:
Scanner Unit/Upper Left Housing/Paper Guide Top Assy/Upper Housing
Removal procedure
1. Open the Panel Unit. (See Fig.
2. Lift the Right Hinge and detach the Panel FFC Guide from the Upper
Housing.
Panel Unit
Panel FFC Guide
Figure 4-178. Removing the Panel Unit (1)
Revision G
4.2.4.1 Panel Unit (p.124)
8.3.2.3 Panel Unit (p.268)
9.4.2.10 Panel Unit (p.302)
9.4.2.18 Panel Unit (p.311)
4-178.)
Right Hinge
Confidential
188