Rear Left Housing - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Before installing the Panel Unit, insert the Panel FFC Cover
into the hole of the Upper Housing.
Panel FFC Cover
Panel Unit
Hole of Upper Housing
Figure 9-52. Installing the Panel Unit
After removing/replacing the Panel Unit, make the specified
A D J U S T M E N T
R E Q U I R E D
adjustments. (See
After replacing the Panel Unit, be sure to perform the required
lubrication. (See Chapter 6
Artisan 837/730/PX830FWD/PX730WD/TX730WD
Upper Housing
"9.5 Adjustment" (p.321).)
"MAINTENANCE".)

9.4.2.19 Rear Left Housing

This section describes the disassembly/reassembly procedures of the
C H E C K
Rear Left Housing for Artisan 730/PX730WD/TX730WD.
P O I N T
The disassembly/reassembly procedures for Artisan 837/
PX830FWD differ from those for Artisan 730/PX730WD/
TX730WD, therefore, see
the procedures.
Parts/Components need to be removed in advance:
Scanner Unit/Decoration Plate Left Upper/Decoration Plate Left Upper Sub/Paper
Guide Top Assy/Upper Housing
Removal procedure
1. Remove the screws (x2) that secure the Rear Left Housing and remove the
Rear Left Housing.
Rear Left Housing
Figure 9-53. Removing the Rear Left Housing
When installing the Rear Left Housing, insert the ribs (x2) of the
Rear Left Housing to the inside of the Left Housing. (See
Disassembly/assembly
Revision G
"9.4.2.4 Rear Left Housing" (p.297)
Left Housing
C.B.A. 3x6 (6±1Kgfcm)
Fig.
Confidential
for
Rib
9-53.)
313