Right Housing/Card Cover - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD

4.3.1.7 Right Housing/Card Cover

Because the parts to remove differ between models, see below for
C H E C K
other than Artisan 710/725/PX710W/TX710W/PX720WD/
P O I N T
TX720WD.
Artisan 810/835/PX810FW/TX810FW/PX820FWD/TX820FWD:
4.2.3.11 Right Housing / Card Cover (p.121)
Artisan 837/PX830FWD:
9.4.2.7 Right Housing/Housing Front Right (p.300)
Artisan 730/PX730WD/TX730WD:
9.4.2.21 Right Housing / Housing Front Right (p.315)
Parts/Components need to be removed in advance:
Scanner Unit/Upper Left Housing/Paper Guide Top Assy/Upper Housing/Hinge/
Rear Right Housing
Removal procedure
1. Remove the screw (x1) that secures the Right Housing.
Figure 4-174. Removing the Right Housing/Card Cover (1)
DISASSEMBLY/ASSEMBLY
Right Housing
Positioning hole & dowel
C.B.S. 3x6 (black) (8±1Kgfcm)
Disassembly/reassembly procedures specific to Artisan 710/PX710W/TX710W
When removing the Right Housing, be careful not to let the Card
C A U T I O N
Cover interfere with the Card Slot Assy or the Card Cover may be
damaged.
2. Release the dowel (x1) on the front side (see
the bottom of the Right Housing, and remove the Right Housing.
Right Housing
Figure 4-175. Removing the Right Housing/Card Cover (2)
3. Release the hooks (x2) on the back of the Right Housing and remove the Card
Cover.
Figure 4-176. Removing the Right Housing/Card Cover (3)
Revision G
Fig. 4-174) and hooks (x3) on
Hook
Card Cover
Hook
187
Confidential