Routing Ffc/Cables - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD

9.4.3 Routing FFC/cables

ADF/SCANNER (ARTISAN 837/PX830FWD)
No. FFC/cable name
1 ADF Motor Cable
2 ADF Sensor Cable
3 Cover Open Sensor FFC
4 Scanner Carriage FFC
5 Scanner CR Encoder FFC
6 Document Cover Open Sensor Cable
7 Grounding wire (x2)
Note * : See Fig. 4-196 for the connector positions on the Main Board (Artisan 837/
PX830FWD).
Grounding wire from
the Scanner Unit
Grounding wire from
the ADF Unit
Ferrite Core A:
Put the Scanner Carriage FFC
through this and attach it to
the Upper Housing.
Document Cover
Open Sensor Cable
Relay Board
Figure 9-66. ADF/Scanner (Artisan 837/PX830FWD)
Artisan 837/730/PX830FWD/PX730WD/TX730WD
CN No. * Remarks
CN25 ---
CN51 ---
CN10 ---
CN41 Ferrite core x1
CN49 ---
Connect to the Relay Board
---
(CN2)
--- ---
Scanner CR Encoder FFC
ADF Motor Cable
Scanner Carriage FFC:
Secure this on Main Board
Unit with double-sided tape.
ADF Sensor Cable
Cover Open Sensor FFC
Double-sided tape
Disassembly/assembly
SCANNER (ARTISAN 730/PX730WD/TX730WD)
No. FFC/cable name
1 Scanner Cover Open Sensor FFC
2 Scanner Carriage FFC
3 Scanner CR Encoder FFC
4 Document Cover Open Sensor Cable
5 Grounding wire (x1)
Note * : See Fig. 4-198 for the connector positions on the Main Board (Artisan 730/
PX730WD/TX730WD).
Grounding wire
Ferrite Core A:
Put the Scanner Carriage FFC
through this and attach it to
the Upper Housing.
Document Cover
Open Sensor Cable
Relay Board
Figure 9-67. Scanner (Artisan 730/PX730WD/TX730WD)
Revision G
*
CN No. Remarks
CN10 ---
CN41 Ferrite core x1
CN49 ---
Connect to the Relay Board
---
(CN2)
--- ---
Scanner CR Encoder FFC
Scanner Carriage FFC:
Secure this on Main Board
Unit with double-sided tape.
Cover Open Sensor FFC
Double-sided tape
319
Confidential