Field Service Ver. 1.0 Apr. 2007
6.2
Utility mode function setting procedure
6.2.1
Procedure
1. Press the Utility key.
2. The UTILITY MODE screen will appear.
6.2.2
Exiting
• Press the Reset key.
6.2.3
Changing the setting value in Utility Mode functions
• Select the appropriate item using ▲ / ▼ key, or the 10-key pad.
1. Select the setting value using [▲ / ▼ /
1. Validate the selected setting value using the OK key.
2. To go back to the previous screen, press the Back key.
6.3
Setting in the Utility mode
6.3.1
MACHINE SETTING
A. BUZZER VOLUME
Functions
• This function can be used to set the volume of alarms and the beep sounded when a
key is pressed.
Use
Setting/
• The default setting is "LOW".
Procedure
B. INITIAL MODE
Functions
• This function can be used to set the mode (Copy mode or Fax mode) that the
machine starts up in or returns to after the control panel is Reset.
Use
Setting/
• The default setting is "COPY".
Procedure
C. SCAN THRESHOLD
Functions
• This function is used to set the remaining memory that the memory is defined as full
and the scanning is stopped.
Use
Setting/
• The default setting is "512 KByte".
Procedure
OFF
"COPY"
256 KByte
"512 KByte"
/
] key or the 10-key pad.
"LOW"
HIGH
FAX
1024 KByte
6. Utility Mode
1536 KByte
19