Konica Minolta BIZHUB 163 Service Manual page 435

3. Other
3.2 Disassembly/Assembly/Cleaning list (Other parts)
3.2.1 Disassembly/Assembly parts list
No. Section
1 Uniut
2
3
Exterior parts
4
5
6 Board and etc.
3.3 Disassembly/Assembly procedure
3.3.1 ADF
[2]
[3]
12
ADF
Document feed section cover
Rear cover
Document feeding tray
Document feeding tray cover
DF control board
[1]
[1]
4688F2C517DA
[1]
[2]
[1]
4688F2C518DA
Field Service Ver. 1.0 Apr. 2007
Part name
1. Remove nine screws [1] and then
remove the rear cover [2] of the main
body.
NOTE
• Make sure that the screws illus-
trated right with arrows have wash-
ers when installing.
2. Remove four screws [1] and remove
the uper rear cover [2].
NOTE
• Make sure to hold the angle detect-
ing lever [3] with fingers at the time
of removing or installing.
Ref. page
P.12
P.14
P.14
P.14
P.15
P.16