Contents Updating the Firmware (for Windows) ..........1 System Requirements ............... 2 Starting the Firmware Updater ............3 If the printer is not connected correctly .......... 7 Updating the Firmware (for Macintosh) ........... 8 System Requirements ............... 9 Starting the Firmware Updater ............10 If the printer is not connected correctly ........
Edition, Windows Server 2003 x64 Edition Available hard disk space: - Approximately 20~26 MB Memory: - 128 MB or more Interface: - USB 2.0 (High Speed) compliant Compatible printer: - magicolor 1680MF - magicolor 1690MF - magicolor 4690MF - magicolor 4695MF System Requirements...
Starting the Firmware Updater CAUTION You must have administrator privileges in order to update the firmware. CAUTION Before starting the firmware updater, make sure that the printer is correctly connected with a USB cable. CAUTION Before starting the firmware updater, confirm that the scanner driver (TWAIN driver) is installed with a USB connection.
Page 6
If the User Account Control window appears when installing on Windows Vista, click [Allow] button or [Continue] button. The following procedure describes how to update the firmware for magicolor 1690MF. Follow the same procedure to update the firmware for magicolor 1680MF, magicolor 4690MF and magicolor 4695MF.
Page 7
Double-click the firmware updater (exe format). The Software End User License Agreement is displayed. Select “I accept the terms of the license agreement.”, and then click [OK] button. A message appears, requesting confirmation to update the firmware. Click [Transfer] button to begin transferring the firmware.
Page 8
The result of the firmware transfer is displayed. Click [Exit] button. On a message window on the printer control panel, the following screen will be shown. After confirming the screen is shown, turn off/on the power of the printer. FIRMWARE UPDATE FIRMWARE UPDATE OK MACHINE POWER OFF/ON Print the configuration page from the printer control panel to...
If the printer is not connected correctly If the printer is not connected correctly, the following message appears. Check that the printer is ready and that the computer is properly connected to the printer, and then click [Retry] button. If the printer is not connected correctly...
(We recommend installing the newest patch.) Available hard disk space: - Approximately 30~42 MB Memory: - 128 MB or more Interface: - USB 2.0 (High Speed) compliant Compatible printer: - magicolor 1680MF - magicolor 1690MF - magicolor 4690MF - magicolor 4695MF System Requirements...
Starting the Firmware Updater CAUTION You must have administrator privileges in order to update the firmware. CAUTION Before starting the firmware updater, make sure that the printer is correctly connected with a USB cable. CAUTION Before starting the firmware updater, confirm that the printer driver is installed with a USB connection.
Page 13
The following procedure describes how to update the firmware for magicolor 1690MF. Follow the same procedure to update the firmware for magicolor 1680MF, magicolor 4690MF and magicolor 4695MF. Connect the computer and the printer with a USB cable, and turn on the power of the printer.
Page 14
Double-click the firmware updater. The Software End User License Agreement is displayed. Select “I accept the terms of the license agreement.”, and then click [OK] button. A message appears, requesting confirmation to update the firmware. Click [Transfer] button to begin transferring the firmware.
Page 15
The result of the firmware transfer is displayed. Click [Exit] button. On a message window on the printer control panel, the following screen will be shown. After confirming the screen is shown, turn off/on the power of the printer. FIRMWARE UPDATE FIRMWARE UPDATE OK MACHINE POWER OFF/ON Print the configuration page from the printer control panel to...
If the printer is not connected correctly If the printer is not connected correctly, the following message appears. Check that the printer is ready and that the computer is properly connected to the printer, and then click [Retry] button. If the printer is not connected correctly...