Field Service Ver. 1.0 Apr. 2007
Maintenance
2.
Periodical check
2.1
Maintenance procedure (Periodical check parts)
2.1.1
Replacing the feed roller
A. Periodically replaced parts/cycle
• Feed roller: Every 150,000 prints
B. Replacing procedure
1. Remove the paper feed unit.
See P.5
[1]
3. To reinstall, reverse the order of removal.
[2]
4686F2C001DA
[1]
4686F2C501DA
2. Periodical check
2. Remove the feed roller lock [1].
Then, slide and take off two feed roll-
ers [2].
NOTE
• Make sure that the feed roller lock
[1] is in position.
3