Konica Minolta BIZHUB 163 Service Manual page 186

Field Service Ver. 1.0 Apr. 2007
12.4 Manual bypass (for the optional AD-504) CD registration
adjustment *bizhub 211/220 only
NOTE
• This adjustment is to be made when the PH unit has been replaced.
<Adjustment procedure>
1. Load the paper feed tray/1 with A4 paper.
2. Enter function of the Service Mode.
3. Select "PRN TEST PATTERN" and then "PATTERN1." Then, press the Start key.
This will produce a test pattern.
4. Place the test pattern produced on the original glass.
5. Load A4 paper in the manual bypass and make a test copy.
A
7. Open the right door.
[1]
A09AF3E536DA
[1]
[2]
A09AF3E537DA
12. Mechanical adjustment
6. Check width A on the copy of the test
pattern.
If width A falls outside the specified
range, perform the following steps to
make an adjustment.
Specifications
20 ± 2.0 mm
8. Remove two screws [1] and the man-
ual bypass cover [2].
151