Fusing Unit Interlock Switch (S2) - Konica Minolta BIZHUB 163 Service Manual

6. Other
6.3.35

Fusing unit interlock switch (S2)

1. Remove the rear cover.
See P.47
[1]
[1]
[1]
80
A09AF2C040DA
A09AF2C041DA
[1]
[2]
A09AF2C042DA
Field Service Ver. 1.0 Apr. 2007
2. Remove the harness from the wire
saddle [1].
3. Remove two screws [1] (to which red
paint has been applied).
4. Unplug four connectors [1], and
remove the fusing unit interlock
switch assy [2].
NOTE
• When installing the fusing unit
interlock switch assy, make sure
that the connectors are connected
properly.