Service Mode; Service Mode Setting Procedure; Procedure; Exiting - Konica Minolta BIZHUB 163 Service Manual

7. Service Mode

7. Service Mode
7.1

Service mode setting procedure

NOTE
• Care must be used to ensure that only the personnel who are involved in service
jobs know the procedure to enter the service mode.
7.1.1

Procedure

1. Press the Utility key.
2. Press the following keys in this order.
3. Stop → 0 → 0 → Stop → 0 → 1
4. The Service mode menu screen will appear.
7.1.2

Exiting

• Press the Reset key.
7.1.3

Changing the setting value in service mode functions

1. Select the desired item using ▲ / ▼ key.
2. Select the setting value using [▲ / ▼ /
3. Validate the selection by pressing the OK key.
4. To go back to previous screen, press the Back key.
38
Field Service Ver. 1.0 Apr. 2007
/ ] key or the 10-key pad.