Konica Minolta BIZHUB 163 Service Manual page 584

Field Service Ver. 1.0 Apr. 2007
(6) AUTO RECEPTION
Functions
• This function is used to specify the time interval (in minutes) for checking E-mail,
when Auto Reception is enabled.
Use
Setting/ • The default setting is "OFF".
Procedure
• When [ON] is selected, set the interval time (minute) to check a mail.
The default setting is "15 min". (1-60min)
NOTE
• FIt will be displayed only when the FK-506 is mounted.
(7) REPLY ADDRESS
Functions
• This function is used to enter the e-mail address to be used when sending notification
of an error, if an error occurs while receiving an Internet fax.
Use
Setting/ • Up to 64 characters can be entered for the reply address.
Procedure
NOTE
• FIt will be displayed only when the FK-506 is mounted.
(8) HEADER PRINT
Functions
• This function is used to specify whether or not to print header information when print-
ing E-mails that have been received.
Use
Setting/ • The default setting is OFF.
Procedure
NOTE
• FIt will be displayed only when the FK-506 is mounted.
D. USER SETTING
(1) NTP SERVER ADDRESS
Functions • This function is used to enter NTP server address.
Use • This function is used to set the precise time from the NTP server.
Setting/ • Input the address of NTP server using the 10-key, and press OK key.
Procedure NOTE
• FIt will be displayed only when the FK-506 is unmounted.
(2) TIME ZONE
Functions • This function is used to set the time gap from the standard time added to the mail
header at mail sending.
Use • This function is used to change the time gap from the standard time.
Setting/ • Select the corresponding time zone, and press OK key.
Procedure
NOTE
• FIt will be displayed only when the FK-506 is unmounted.
"OFF"
"OFF"
5. Utility Mode
ON
ON
19