Utility Mode Function Setting Procedure; Procedure; Exiting; Changing The Setting Value In Utility Mode Functions - Konica Minolta BIZHUB 163 Service Manual

Field Service Ver. 1.0 Apr. 2007
8.2

Utility Mode function setting procedure

8.2.1

Procedure

1. Press the Utility key.
2. The Utility Mode screen will appear.
8.2.2

Exiting

• Press the Back key.
8.2.3

Changing the setting value in Utility Mode functions

• Select the appropriate item using [ ▲ / ▼ /
• Select the setting value using [ ▲ / ▼ /
1. Validate the selected setting value using the OK key.
2. To go back to the previous screen, press the Back key.
8.3

Setting in the Utility Mode

8.3.1

MACHINE SETTING

A. AUTO PANEL RESET
Functions • To set the time it takes the auto panel reset function, which resets the panel settings
when the set period of time elapses after a copy cycle has been completed or the last
Use
key operated, to be activated.
Setting/ • The default setting is 1 min.
Procedure
B. ENERGY SAVE MODE
Functions
• To set the time it takes the machine to enter the energy saver mode after a copy cycle
has been completed or the last key operated.
Use
Setting/ • The default setting is 15 min.
Procedure
C. AUTO SHUT OFF
Functions • To set the time it takes the auto shut OFF function, which shuts down the machine
when the set period of time elapses after a copy cycle has been completed or the last
Use
key operated, to be activated.
Setting/ • The default setting is OFF.
Procedure
• If selecting "ON", set the time that the AUTO SHUT OFF function is turned ON.
OFF 30sec "1min"
ON
/ ] key, or the 10-key pad.
/ ] key, or the 10-key pad.
2min 3min 4min
1 to 240 min.
OFF
15 to 240 min.
8. Utility Mode
5min
99