Softswitch; Factory Test - Konica Minolta BIZHUB 163 Service Manual

7. Service Mode
7.3.3

SOFTSWITCH

See P.47
7.3.4

FACTORY TEST

A. SIGNAL TEST
• This test is for factory adjustment only and should NOT be used.
B. RELAY TEST
• This test is for factory adjustment only and should NOT be used.
C. DIAL TEST
• This test is for factory adjustment only and should NOT be used.
D. VOLUME TEST
Functions
• Buzzer issues sound correct.
Use
Setting/ 1. Press the OK key, and a buzzer can be heard.
Procedure 2. Pressing the
44
/ keys will select the volume of [HIGH] or [LOW].
Field Service Ver. 1.0 Apr. 2007