Konica Minolta BIZHUB 163 Service Manual page 110

Field Service Ver. 1.0 Apr. 2007
[1]
[1]
[2]
A09AF2C524DA
[1]
A09AF2C525DA
[1]
A09AF2C526DA
18. Pass the cable from pulley D [1] into
the hole [2] in the IR frame.
19. Pass the leading edge of each of the
front and rear cables [1] into the
space between the IR frame and
copier frame.
20. Affix tape to temporarily secure the
cables to the copier frame.
21. Wind the upper cable of wire pulley 1
around pulley B [1] and hook it onto
the hook.
NOTE
Wind the cable around the inner
groove in pulley B.
6. Other
75