5. Service Mode
5.3.2
FUNCTION
A. ADF FEED TEST
Functions
• To check for correct paper passage of the paper take-up and transport system in the
automatic (duplexing) document feeder alone as a single unit.
• Here are the details of operation involved in the paper passage motion.
• The Scanner does not make any scan motion.
• Paper passage operation continues until all pages of the document loaded in the unit
have been fed in.
Use
• When a paper misfeed of originals occurs
Setting/
1. Enter [FUNCTION] of the Service mode.
procedure
2. Select [ADF FEED TEST] and press the OK key.
3. Select [1-SIDED] and press the OK key to start the ADF feed test.
• Press the Stop key to stop the ADF feed test.
B. COPY ADF GLASS
Functions
• To check for scratches and dirt on the original scanning glass.
Use
• When a dirty image occurs
Setting/
1. Enter [FUNCTION] of the Service mode.
procedure
2. Select [COPY ADF GLASS].
3. Press the Start key to start the COPY ADF GLASS AREA test.
4. The copier produces two copy samples (in order to know dirt on the glass from printer
image noise).
22
Field Service Ver. 1.0 Apr. 2007