YASKAWA CIMR-VU BA0001 Technical Manual page 484

D.4 Safe Disable Input
• During run:
Place short circuit between terminals H1 and HC to disable "Safe Torque Off" after clearing the Run command when the Safe
Disable function is triggered during stop. Enter the Run command after entering the STOP command regardless of whether
terminals H1-HC are ON.
n Validating Safe Disable Function
Always perform the validation test on the Safe Disable inputs after completing the wiring after start-up, when replacing parts,
or when conducting maintenance. Maintain check results as a record of tests performed.
484 YASKAWA ELECTRIC SIEP C710606 18F YASKAWA AC Drive – V1000 Technical Manual