YASKAWA CIMR-VU BA0001 Technical Manual page 339

4.
Attach the option card to the drive.
A – Line up the tab with the mounting
hole.
Note: Gently pack wires to fit behind the left and right side of the cover into the provided recess.
5.
Connect the lead from the drive ground terminal to the same terminal as the option card lead.
The option card lead should exit through the holes provided on the underside of the drive as it gets routed passed the
ground terminal.
A – Drive ground terminal
B – Route the lead wire on the inside of
the lower cover.
C – Ground lead
6.
Reattach the option card cover.
A –Align the tab with the mounting hole.
YASKAWA ELECTRIC SIEP C710606 18F YASKAWA AC Drive – V1000 Technical Manual
A
B
B – Line up the tab with the mounting
hole.
Figure 8.14 Attach Option Card
E
D
B
C
D – Ground lead through-hole
E – Ground lead
Figure 8.15 Lead Wire Connection
A
Figure 8.16 Reattach Cover
8.6 Connecting an Option Card
A
8
339