Srx5K-Mpc3-100G10G Specifications - Juniper SRX5400 Manual

Hide thumbs Also See for SRX5400:

Table of Contents

Serial Number Location

Documentation

SRX5K-MPC3-100G10G Specifications

The serial number label is located as shown in

Figure 20: SRX5K-MPC3-40G10G Serial Number Label

SRX5K-MPC3-100G10G Specifications on page 31

Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways on page 4

The SRX5K-MPC3-100G10G (IOC3) is an interface card that provides 100 Gigabit Ethernet

and 10 Gigabit Ethernet interfaces, with a Packet Forwarding Engine that provides a 240

Gbps line rate. This interface card is supported on SRX5400, SRX5600, and SRX5800

Services Gateways. See

Figure 21 on page

NOTE:

These cards do not support plug-in Modular Interface Cards (MICs).

All ports on the interface card have dual-color LEDs for reporting link status.

The interface card also supports hot-pluggable optical modules.

You can install the interface card in any of the slots that are not reserved for Switch

Control Boards (SCBs).

Figure 20 on page

31.

32.

Table of Contents

Srx5600 Srx 5800