Switch Control Boards; Switch Control Boards Specifications; Switch Control Board Srx5K-Scb Specifications - Juniper SRX5400 Manual

Services gateway card reference

Hide thumbs Also See for SRX5400:

Table of Contents

CHAPTER 6

Switch Control Boards

IN THIS CHAPTER

Switch Control Boards Specifications

IN THIS SECTION

Switch Control Board SRX5K-SCBE Specifications | 70

Switch Control Board SRX5K-SCB3 Specifications | 72

Switch Control Board SRX5K-SCB4 Specifications | 74

Switch Control Board SRX5K-SCB Specifications

The SRX5K-SCB Switch Control Board (SCB)

Powers on and powers off I/O cards (IOCs) and Services Processing Cards (SPCs)

Controls clocking, system resets, and booting

Monitors and controls system functions, including fan speed, board power status, PDM status and

control, and the system front panel

Provides interconnections to all the IOCs within the chassis through the switch fabrics integrated into

the SCB

SRX5400 and SRX5600 Services Gateways have one SCB each installed and you can install a second SCB

for redundancy. The SRX5800 Services Gateway has two SCBs installed and you can install a third SCB

for switch fabric redundancy.

(Figure 38 on page

68) performs the following functions:

Table of Contents

Srx5600 Srx 5800