Displaying The Pagination Mode; Setting The Pagination Mode - HP VMA Series Installation And Service Manual

Chapter 5 - Operating the System via the CLI
82

Displaying the Pagination Mode

To view whether pagination is enabled or disabled in the current CLI window:
Log into the Memory Array.
1.
Navigate to the
2.
context cli
CLI
At the context prompt, type:
3.
show pagination
The command displays information similar to the following:.
cli> show pagination
Current pagination setting is: on

Setting the Pagination Mode

Enable or disable pagination in the CLI window. When pagination is disabled, data
displays on screen without pausing.
To enable or disable pagination in the CLI window:
Log into the Memory Array.
1.
Navigate to the
2.
context cli
CLI
At the context prompt, type:
3.
set pagination {on | off}
Where:
Enables pagination in the current CLI window.
on
Disables pagination in the current CLI window.
off
VMA-series Memory Array Installation and Service Guide
CLI
context level. At the root prompt, type:
CLI
context level. At the root prompt, type:
HP-AM456-9002A Rev 01