Table of Contents
Advertisement
Appendix D - CLI Reference
Status Context Commands
290
Figure D.23 System>Status Context Level
The table below describes the commands available at the Status context
sublevel of the CLI. Access the Status context sublevel through the System
context level. See
System Context Commands
Table D.26 Status Context Command
Command
Displays the current status of the system software modules.
show
show
Displays the status of various software modules.
Syntax
show
The command displays information similar to the following when the system is
operating correctly:
system status> show
alarm-mgr
data-mgr
diagnostics-mgr
hardware-mgr
inventory-mgr
raid-mgr
data-plane
raid-rebuild
vimm-config
VMA-series Memory Array Installation and Service Guide
on page 257.
Description
running
running
running
running
running
running
available
inactive
in-spec-84-vimm
HP-AM456-9002A Rev 01
Advertisement
Table of Contents
