Chapter 4 - Configuring the Array
Memory Array Default Settings
58
The Memory Array has the system default settings listed in
these settings using the CLI over a Telnet/SSH session or the serial port on the
Memory Array. See
Table 4.1 Memory Array System Default Settings
Setting
Host Name
IP Address
IP Netmask
Gateway
DHCP
User Login Name
User Password
DNS Config
DNS Name Server
DNS Search
Clock Source
Shell Connectivity
Serial Port Settings
System Log (syslog)
Message Logging Level
Command Line Editor
CLI Window Columns
Usable VIMM Capacity
VMA-series Memory Array Installation and Service Guide
Changing the Default System Settings
violin
192.168.1.2 (static)
255.255.255.0
undefined
disabled
admin
admin
manual
undefined
undefined
host
Serial, Telnet (port 23), SSH (port 22)
9600 Baud, No Parity, 8 bits, 1 stop
disabled
info
emacs
80
65%
Table
4.1. Change
on page 62.
Default Value
HP-AM456-9002A Rev 01