Table of Contents
Advertisement
HP-AM456-9002A Rev 01
The command displays information similar to the following:
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
#
The system command prompt is returned. Finish by creating the file system
that uses the new block device partition, creating the new mount path, and
mounting the new block device file system.
Create a file system on the block device by typing:
6.
mkfs -t ext3 /dev/vtmsa<n>
Where:
-t ext3
/dev/vtmsa<n>
VMA-series Memory Array Installation and Service Guide
Configuring Partitions and Storage Devices
Specifies the type of file system to be built.
Specifies the name of the new file system,
where
is the assigned device number.
<n>
131
Advertisement
Table of Contents
