Table of Contents
Advertisement
Appendix D - CLI Reference
224
Where:
Moves the user into the context level for the specified slot - <n>.
<n>
Valid values are in the range of 0-83, inclusive. See
Commands
The system prompt changes to the following:
chassis board 0 slot n>
Example
To move into the context level for slot 56, at the Board 0 context prompt, type:
context slot 56
The command displays information similar to the following:.
chassis board 0> context slot 56
chassis board 0 slot 56>
set flash-scrubbing
Use this command only on a flash-based Memory Array.
Note:
Enables or disables flash memory scrubbing.
Syntax
set flash-scrubbing {enabled | disabled}
Where:
enabled
disabled
The command displays information similar to the following:.
chassis board 0> set flash-scrubbing enabled
flash-scrubbing
VMA-series Memory Array Installation and Service Guide
on page 227.
Enables scrubbing of flash memory.
Disables scrubbing of flash memory.
enabled
Slot Context
HP-AM456-9002A Rev 01
Advertisement
Table of Contents
