Board 0 Context Commands; Context Slot; Figure D.3 Chassis>Board 0 Context Commands; Table D.3 Board 0 Context Commands - HP VMA Series Installation And Service Manual

Board 0 Context Commands

Table D.3 Board 0 Context Commands

Command

context slot

set flash-scrubbing
show flash-scrubbing
show info
set write-buffer
show write-buffer
HP-AM456-9002A Rev 01
Figure D.3 Chassis>Board 0 Context Commands
The table below describes the commands available at the Board 0 context
sublevel of the CLI.
Moves the user into the context level for the specified slot. See
Context Commands
Sets whether the flash memory is scrubbed or not.
Displays whether the flash memory scrubbing function has been enabled
or not.
Note: Use this command only on a flash-based Memory Array.
Displays information about the main board in the system.
Enables or disables write buffer on the flash-based VIMMs.
Note: Use this command only on a flash-based Memory Array.
Displays whether the write buffer on the flash-based VIMMs has been
enabled or not.
context slot
Moves into the context level for the specified slot.
Syntax
context slot <n>
VMA-series Memory Array Installation and Service Guide
Description
on page 227.
Board 0 Context Commands
Slot
223