Power Supplies; Table 1.2 Rear Led Descriptions - HP VMA Series Installation And Service Manual

Table 1.2 Rear LED Descriptions

LED
Label
Status Indicates the system status. When lit, the LED could be:
• Flashing slowly—Indicates that the system monitor is booting up.
• Flashing quickly—Indicates that the system software is booting up, the VIMMs
are being detected and programmed, and no RAID groups have been created.
• Solid green—Indicates that the VIMMs are programmed, that the RAID groups
are created, and that the system software has completed booting.
Alarm Indicates a system alarm when lit.
When flashing, indicates that the datapath is either severely degraded or
is unavailable.
Power A Indicates that the first power feed is connected correctly.
Power B Indicates that the second power feed is connected correctly.
HP-AM456-9002A Rev 01
Rear LEDs
The rear LEDs are illustrated in the figure below:
A A
B B
Figure 1.4 Rear System LEDs
The Rear LEDs are described in the following table.
Description

Power Supplies

The chassis contains two power supplies that provide an AC power source for
the Memory Array. See
specifications.
Figure 1.5 Power Supply
VMA-series Memory Array Installation and Service Guide
RAID RAID
LOC C
System Specifications on page 31 for power supply
Physical Components
Color When
Lit
Green
Red
Green
Green
27