CHAPTER 5
HP-AM456-9002A Rev 01
Operating the System via the CLI
The CLI resides on the Memory Array and is used to retrieve system status and
set configuration information. This chapter describes how to use the CLI to
perform various procedures in the following sections:
•
Connecting to the CLI
•
Displaying and Setting the CLI Window Options
•
Displaying and Setting System Information
•
Displaying and Setting Hardware Information
•
Displaying Alarms and Logs
•
Rebooting the Memory Array
•
Upgrading the System Software
See
Appendix D, CLI Reference
VMA-series Memory Array Installation and Service Guide
on page 76
on page 83
on page 92
on page 96
on page 98
on page 100
for details on using the CLI commands.
on page 79
75