Displaying The Messages Log - HP VMA Series Installation And Service Manual

system> show log
xxx xx xx:xx:xx [000000000] INFO vtu_log_init(): ------------ LOG RESTART ------------
xxx xx xx:xx:xx [000000010] INFO ecpu_hwmgr_init(): Running fans at full speed
xxx xx xx:xx:xx [000000010] INFO main(): Main controller build ID: 12954
xxx xx xx:xx:xx [000000010] INFO main(): S/W Rel: <release>, Built: <date> 12:16:39 on
swbuild.violintech.net by user common
system> show messages
Nov 30 00:28:22 kernel: Linux version 2.6.17.11719 (common@swbuild.violintech.net) (gcc
version 3.4.6) #2 PREEMPT Mon Dec 22 12:38:51 EST 2008
Nov 30 00:28:22 kernel: ^O^M
Nov 30 00:28:22 kernel:
Nov 30 00:28:22 kernel: uClinux/Nios II
Nov 30 00:28:22 kernel: Altera Nios II support (C) 2004 Microtronix Datacom Ltd.
Nov 30 00:28:22 kernel: On node 0 totalpages: 32512
Nov 30 00:28:22 kernel:
Nov 30 00:28:22 kernel: Built 1 zonelists
Nov 30 00:28:22 kernel: Kernel command line: CONSOLE=/dev/ttyS0 root=/dev/ram0 rw
panic=10 mtdparts=violin-0:256k(BOOTROM)ro,128k(ENV1),128k(ENV2),1536k(FLATFS3),32m
(UPGRADE),8m(CPLgold)ro,16m(OAMgold)ro,6016k(SPARE) oeth_mac=00:1b:97:00:00:86
Nov 30 00:28:22 kernel: PID hash table entries: 512 (order: 9, 2048 bytes)
Nov 30 00:28:22 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Nov 30 00:28:22 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Nov 30 00:28:22 kernel: Memory available: 122496k/130048k RAM, 0k/0k ROM (1707k kernel
code, 4607k data)
HP-AM456-9002A Rev 01
The command displays information similar to the following:

Displaying the Messages Log

The embedded operating system running on the Memory Array produces a
message log similar to the /var/log/messages file found on Linux operating
systems. The message log file created on the Memory Array contains system log
and typical boot-up messages in addition to any set CLI commands that are run
on the system.
To display the messages log file:
Log into the Memory Array.
1.
System
Navigate to the
2.
context system
System
At the context prompt, type:
3.
show messages
The command displays information similar to the following:.
DMA zone: 32512 pages, LIFO batch:7
VMA-series Memory Array Installation and Service Guide
context level. At the root prompt, type:
Displaying Alarms and Logs
97