Table of Contents
Advertisement
Chapter 5 - Operating the System via the CLI
88
Navigate to the
2.
context chassis controller ethernet 0
At the
Ethernet 0
3.
show
The command displays text similar to the following:
chassis controller ethernet 0> show
dhcp
ip-address
netmask
gateway
mac-address
dns-config
dns-nameserver
dns-search
provisioned-info
prov-ip-address
prov-netmask
This example indicates that DHCP is currently enabled and that the IP address
is currently 10.10.0.126. However, if you were to change the network
configuration to static, the IP address used would be 192.168.1.2.
Displaying the System's Hostname
Log into the Memory Array.
1.
Navigate to the
2.
context system
System
At the
context prompt, type:
3.
show name
The command displays information similar to the following:.
system name> show
name
Violin Memory Array
Retrieving the MAC Address
The MAC address of the Memory Array's Ethernet port can be found on the back
of the system or in the system attribute files.
To retrieve the device MAC address and serial number, do one of the following:
VMA-series Memory Array Installation and Service Guide
Ethernet 0
context level. At the root prompt, type:
context prompt, type:
enabled
10.10.0.126
255.255.255.0
10.10.0.1
00:1B:97:00:00:05
automatic
10.10.0.2
domain.net
192.168.1.2
255.255.255.0
System
context level. At the root prompt, type:
HP-AM456-9002A Rev 01
Advertisement
Table of Contents
