Displaying and Setting the CLI Window Options
HP-AM456-9002A Rev 01
The settings for the terminal window displaying the current CLI session can be
modified to suit your display equipment. You can set or retrieve the following
window display options:
•
Number of columns and lines in the display window
•
Pagination
•
Command line editing mode
•
Size of the history buffer
Displaying the Number of Columns
To view the number of columns in the current CLI display window:
Log into the Memory Array.
1.
Navigate to the
CLI
2.
context cli
CLI
At the
context prompt, type:
3.
show columns
The command displays information similar to the following:
cli> show columns
Current column setting is: 200
Setting the Number of Columns
Set the number of columns in the display window using the
command. Set the number of columns in the range of 80-200 inclusively, with
the default setting of 80. This determines where the display lines are
automatically wrapped to the next line if you find that your terminal settings are
not wrapping lines correctly.
To set the number of columns in the display window:
Log into the Memory Array.
1.
CLI
Navigate to the
2.
context cli
At the
CLI
context prompt, type:
3.
set columns {80-200}
VMA-series Memory Array Installation and Service Guide
Displaying and Setting the CLI Window Options
context level. At the root prompt, type:
context level. At the root prompt, type:
set columns
79