Table of Contents
Advertisement
Displaying and Setting System Information
HP-AM456-9002A Rev 01
You can display and set various system information such as the system date and
time, system operational time, the system's IP address, the log, spare VIMM
information, and RAID group mapping. The following sections describe how to
display and set this information.
Displaying System Status Information
Display the status of the various software modules and the validity of the current
VIMM configuration.
Log into the Memory Array.
1.
Navigate to the
System
2.
context system
System
At the
context prompt, type:
3.
show status
By default, the display paginates. The example below shows representative text
that may be displayed. Actual text that is displayed is determined by your
system's configuration.
system> show status
alarm-mgr
data-mgr
diagnostics-mgr
hardware-mgr
inventory-mgr
raid-mgr
vimm-mon
data-plane
raid-rebuild
vimm-config
failed-vimm-ids
admin-down-vimm-ids
missing-vimm-ids
host-interfaces
slot
state
protocol
link-width
neg-link-width
max-data-rate
cfg-data-rate
host
VMA-series Memory Array Installation and Service Guide
Displaying and Setting System Information
context level. At the root prompt, type:
running
running
running
running
running
running
running
available
active (group 2, vimm 07, 47% complete)
out-of-spec-42-vimm
32, 61
60
15
port-1
enabled
pcie
4
4
10 Gb/s
10 Gb/s
detected
83
Advertisement
Table of Contents
