Boot-params Context Level
HP-AM456-9002A Rev 01
Figure D.17 System>Boot-params Context Level
The table below describes the commands available at the Boot-params context
sublevel of the CLI.
Table D.19 Boot-params Context Commands
Command
set stagger-mem-
clear
show stagger-mem-
clear
set stagger-mem-clear
Enables or disables the staggered VIMM boot-up process. When enabled, the
VIMMs boots up in a staggered sequence upon a system reboot.
Syntax
set stagger-mem-clear {disabled | enabled}
Example
To enable the staggered VIMM boot-up process, at the Boot-params context
prompt, type:
set stagger-mem-clear enabled
VMA-series Memory Array Installation and Service Guide
Description
Enables or disables the staggered VIMM boot-up
process.
Displays the current state of the VIMM boot-up
process.
Boot-params Context Level
275