VIMM-summary Context Commands
HP-AM456-9002A Rev 01
Figure D.6 Chassis>Board 0>VIMM-Summary Context Commands
The table below describes the commands available at the VIMM-summary
context level of the CLI. Specify the VIMM number when moving into the Board 0
context level. See
context slot
Table D.6 VIMM-summary Context Commands
Command
Displays various VIMM information.
show
show
Displays which VIMMs are present in the system, the corresponding slot ID
numbers, and the VIMM type.
Syntax
show
Example
To display which VIMM locations are populated, at the VIMM-summary context
prompt, type:
show vimm-summary
VMA-series Memory Array Installation and Service Guide
VIMM-summary Context Commands
on page 223.
Description
233