Table of Contents
Advertisement
Connecting to the CLI
HP-AM456-9002A Rev 01
Logging into the CLI via the Serial Interface
Access the Command Line Interface (CLI) through the serial connection between
the host computer and the Memory Array. This connection was set up when the
equipment was installed into its permanent location. See
Cable
on page 50.
See
Table 3.4
on page 50 for the serial interface default values.
Your settings for the console connection may vary from the listed
Note:
default settings.
Use a USB-to-serial adapter to plug into the serial port on the back of
Note:
the Memory Array if your host computer does not have an available serial port.
Logging in via a Windows host computer
The following procedure shows how to connect to the Memory Array using a
terminal emulation application. For example, using PuTTY to connect to the CLI
through the serial connection:
Log into the host computer as an administrator.
1.
From the Windows
2.
>
Communications
New Connection - PuTTY1
The
Connection Description
In the
3.
Type the name of the new connection in the
a.
Select the appropriate icon from the list of available ones.
b.
Click
when done.
OK
c.
Connect To
The
window opens.
In the
Connect using
4.
Click
.
Connect
5.
The following login prompt appears:
violin login:
Type the default login name (admin) and password (admin) to log into the
6.
system.
You are now connected to the CLI of the Memory Array and can access the
various CLI commands. Closing the PuTTY window terminates the
connection.
VMA-series Memory Array Installation and Service Guide
menu, select
Start
Programs
.
PuTTY
window opens.
window:
drop-down list, select
Connecting to the CLI
Connecting the Serial
>
>
Accessories
field.
Name
.
Serial
59
Advertisement
Table of Contents
