In-memory Context Commands
HP-AM456-9002A Rev 01
Figure D.20 System>Logging>In-Memory Context Level
The table below describes the commands available at the In-memory context
sublevel of the CLI. Access the In-memory context sublevel through the Logging
context level. See
Logging Context Commands
Table D.22 In-memory Context Commands
Command
context category
set default-level
show default-level
context category
Moves into the Category context level to access the message category related
commands.
Syntax
context category <category_name>
Where:
category_name
VMA-series Memory Array Installation and Service Guide
In-memory Context Commands
on page 279.
Description
Moves into the Category context level. See
Category Context Commands
Sets the default logging level for all message
categories.
Displays the default logging level for all message
categories.
The Category context level. See
below for the list of valid message categories.
on page 285.
Table D.23
281