Table of Contents
Advertisement
HP-AM456-9002A Rev 01
•
Excessive ECC Errors on VIMM Alarm
•
Failed to Validate Configuration of VIMMS, Raid Group Alarm
•
No Spare Memory Modules Alarm
•
Programming VIMM Alarm
•
Unsupported VIMM Configuration Alarm
•
VIMM Booting Alarm
•
VIMM Configuration Out Of Spec Alarm
•
VIMM Failed Alarms
•
VIMM Extremely Hot; VIMM Shutdown Alarm
•
VIMM Failed Alarm
•
VIMM Failed: Excessive ECC Errors Alarm
•
VIMM Hot Alarm
on page 206
•
VIMM Incompatible Formatted Capacity Alarm
•
VIMM in Maintenance State Alarm
•
VIMM Isolated Alarm
•
VIMM Temperature Unreadable, VIMM Shut Down Alarm
•
VIMM Unformatted Alarm
•
VIMM Voltage; VIMM Shut Down Alarm
•
VIMM Threshold Exceeded Alarm
•
Fan Running Too Slowly Alarm
Excessive ECC Errors on VIMM Alarm
The Excessive ECC Errors on VIMM alarm indicates that the system has
detected an excessive number of ECC errors on the specified VIMM.
To clear the alarm, replace the VIMM.
Failed to Validate Configuration of VIMMs
Alarm
The Failed to Validate Configuration of VIMMs alarm indicates, on a VIMM-by-
VIMM basis, that configuring the VIMM failed. Configuring the VIMM sets several
parameters to allow it to be usable within the Memory Array.
This alarm should not occur and could indicate a faulty VIMM.
VMA-series Memory Array Installation and Service Guide
on page 203
on page 204
on page 204
on page 204
on page 204
on page 204
on page 205
on page 206
on page 206
on page 206
on page 207
on page 207
on page 207
on page 207
on page 207
Non-Service Affecting Alarms
on page 204
on page 205
on page 206
on page 207
203
Advertisement
Table of Contents
