Table of Contents
Advertisement
Appendix D - CLI Reference
228
The command displays information similar to the following:.
chassis board 0 slot 56> context vimm
chassis board 0 slot 56 vimm>
set led-test
Starts a functional test of the LED associated with the slot specified in the
command. The LED stays lit for two seconds, blinks fast for two
context slot
seconds, blinks slowly for two seconds, then returns to the previous state.
Syntax
set led-test start
Example
To start a functional test of the LED associated with slot 56, at the Slot 56
context prompt, type:
set led-test start
The command displays information similar to the following:
chassis board 0 slot 56> set led-test start
led-test
show led-state
Displays the current status of the LED associated with the slot specified in the
command.
context slot
Syntax
show led-state
Example
To display the current status of the LED associated with slot 56, at the Slot 56
context prompt, type:
show led-state
VMA-series Memory Array Installation and Service Guide
start
HP-AM456-9002A Rev 01
Advertisement
Table of Contents
