Table of Contents
Advertisement
Appendix D - CLI Reference
system> show log
xxx xx xx:xx:xx [000000000] INFO vtu_log_init(): ------------ LOG RESTART ------------
xxx xx xx:xx:xx [000000010] INFO ecpu_hwmgr_init(): Running fans at full speed
xxx xx xx:xx:xx [000000010] INFO main(): Main controller build ID: 12954
xxx xx xx:xx:xx [000000010] INFO main(): S/W Rel:
swbuild.violintech.net by user common
268
The command displays information similar to the following:
show messages
Displays the current contents of the /var/log/messages file. The embedded
operating system running on the Memory Array produces a message log typical
to the /var/log/messages file found on Linux operating systems. The
message log file created on the Memory Array contains system log and typical
boot-up messages in addition to any set CLI commands that are run on the
system.
Syntax
show messages
Example
To display the log messages, at the System context prompt, type:
show messages
VMA-series Memory Array Installation and Service Guide
Release Number
, Built:
Date
12:16:39 on
HP-AM456-9002A Rev 01
Advertisement
Table of Contents
