Debug Ip Igmp Max-Groups - Cisco Catalyst 2960 Command Reference Manual

debug ip igmp max-groups

debug ip igmp max-groups
Use the debug ip igmp max-groups privileged EXEC command to enable debugging of Internet Group
Management Protocol (IGMP) maximum groups events. Use the no form of this command to disable
debugging.
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines
The undebug ip igmp max-groups command is the same as the no debug ip igmp max-groups
command.
Related Commands Command
show debugging
Catalyst 2960 Switch Command Reference
B-18
debug ip igmp max-groups
no debug ip igmp max-groups
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Appendix B Catalyst 2960 Switch Debug Commands
OL-8604-03